Kernel.org: 5.1.15
sid (unstable): 4.19.37-5
buster (testing): 4.19.37-5
stretch (stable): 4.9.168-1+deb9u3
jessie (oldstable): 3.16.68-2

Debian GNU/Linux device driver check & report

HP: d530U

PCI IDWorks?VendorDeviceDriverKernel
80862570YesIntel Corporation82865G/PE/P DRAM Controller/Host-Hub Interfaceagpgart,intel-agp
80862572YesIntel Corporation82865G Integrated Graphics Controlleri915v2.6.32-
80862576Intel Corporation82865G/PE/P Processor to I/O Memory Interface
808624d2YesIntel Corporation82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1usb-uhci,uhci-hcd
808624d4YesIntel Corporation82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2usb-uhci,uhci-hcd
808624d7YesIntel Corporation82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3usb-uhci,uhci-hcd
808624ddYesIntel Corporation82801EB/ER (ICH5/ICH5R) USB2 EHCI Controllerehci-hcd
8086244eYesIntel Corporation82801 PCI Bridgei810_rng
808624d0YesIntel Corporation82801EB/ER (ICH5/ICH5R) LPC Interface Bridgeintel-rng,iTCO_wdtv2.6.25-
808624d1YesIntel Corporation82801EB (ICH5) SATA Controllerata_piixv2.6.25-
808624d3YesIntel Corporation82801EB/ER (ICH5/ICH5R) SMBus Controlleri2c-i801v2.6.25-
808624d5YesIntel Corporation82801EB/ER (ICH5/ICH5R) AC'97 Audio Controllersnd-intel8x0v2.6.25-

jadro  Linux arma 2.6.33.3-tinycore #2012 SMP Wed May 12 17:05:42 EEST 2010 i686 GNU/Linux
snd_intel8x0 dziala
To nie informacja z systemu Debian
dzwiek alsa dziala
mozna odczytac 2 temparatury za pomoca lm85, i2c_dev,i2c_i80,
a 2 wiarakow nie, choc moze tak ma byc
 sudo sensors
adt7463-i2c-0-2e
Adapter: SMBus I801 adapter at fc00
in0:         +0.00 V  (min =  +0.00 V, max =  +3.32 V)   ALARM
in1:         +0.00 V  (min =  +0.00 V, max =  +2.99 V)   ALARM
in2:         +3.33 V  (min =  +0.00 V, max =  +4.38 V)   
in3:         +0.02 V  (min =  +0.00 V, max =  +6.64 V)   ALARM
in4:         +0.00 V  (min =  +0.00 V, max = +15.94 V)   ALARM
fan1:          0 RPM  (min =    0 RPM)
fan2:          0 RPM  (min =    0 RPM)
fan3:          0 RPM  (min =    0 RPM)
fan4:          0 RPM  (min =    0 RPM)
temp1:         FAULT  (low  = -127.0 C, high = +127.0 C)  ALARM  
temp2:       +30.5 C  (low  = -127.0 C, high = +127.0 C)  
temp3:       +42.0 C  (low  = -127.0 C, high = +127.0 C)  
cpu0_vid:   +1.450 V
 (2012-05-30T09:00:22+00:00)